index : cgit

:man source:   cgit
:man manual:   cgit

CGITRC(5)
========


NAME
----
cgitrc - runtime configuration for cgit


SYNOPSIS
--------
Cgitrc contains all runtime settings for cgit, including the list of git
repositories, formatted as a line-separated list of NAME=VALUE pairs. Blank
lines, and lines starting with '#', are ignored.


LOCATION
--------
The default location of cgitrc, defined at compile time, is /etc/cgitrc. At
runtime, cgit will consult the environment variable CGIT_CONFIG and, if
defined, use its value instead.


GLOBAL SETTINGS
---------------
about-filter::
	Specifies a command which will be invoked to format the content of
	about pages (both top-level and for each repository). The command will
	get the content of the about-file on its STDIN, and the STDOUT from the
	command will be included verbatim on the about page. Default value:
	none.

agefile::
	Specifies a path, relative to each repository path, which can be used
	to specify the date and time of the youngest commit in the repository.
	The first line in the file is used as input to the "parse_date"
	function in libgit. Recommended timestamp-format is "yyyy-mm-dd
	hh:mm:ss". Default value: "info/web/last-modified".

cache-root::
	Path used to store the cgit cache entries. Default value:
	"/var/cache/cgit".

cache-dynamic-ttl::
	Number which specifies the time-to-live, in minutes, for the cached
	version of repository pages accessed without a fixed SHA1. Default
	value: "5".

cache-repo-ttl::
	Number which specifies the time-to-live, in minutes, for the cached
	version of the repository summary page. Default value: "5".

cache-root-ttl::
	Number which specifies the time-to-live, in minutes, for the cached
	version of the repository index page. Default value: "5".

cache-scanrc-ttl::
	Number which specifies the time-to-live, in minutes, for the result
	of scanning a path for git repositories. Default value: "15".

cache-size::
	The maximum number of entries in the cgit cache. Default value: "0"
	(i.e. caching is disabled).

cache-static-ttl::
	Number which specifies the time-to-live, in minutes, for the cached
	version of repository pages accessed with a fixed SHA1. Default value:
	"5".

clone-prefix::
	Space-separated list of common prefixes which, when combined with a
	repository url, generates valid clone urls for the repository. This
	setting is only used if `repo.clone-url` is unspecified. Default value:
	none.

commit-filter::
	Specifies a command which will be invoked to format commit messages.
	The command will get the message on its STDIN, and the STDOUT from the
	command will be included verbatim as the commit message, i.e. this can
	be used to implement bugtracker integration. Default value: none.

css::
	Url which specifies the css document to include in all cgit pages.
	Default value: "/cgit.css".

embedded::
	Flag which, when set to "1", will make cgit generate a html fragment
	suitable for embedding in other html pages. Default value: none. See
	also: "noheader".

enable-commit-graph::
	Flag which, when set to "1", will make cgit print an ASCII-art commit
	history graph to the left of the commit messages in the repository
	log page. Default value: "0".

enable-filter-overrides::
	Flag which, when set to "1", allows all filter settings to be
	overridden in repository-specific cgitrc files. Default value: none.

enable-gitweb-owner::
	If set to "1" and scan-path is enabled, we first check each repository
	for the git config value "gitweb.owner" to determine the owner.
	Default value: "1". See also: scan-path.

enable-index-links::
	Flag which, when set to "1", will make cgit generate extra links for
	each repo in the repository index (specifically, to the "summary",
	"commit" and "tree" pages). Default value: "0".

enable-log-filecount::
	Flag which, when set to "1", will make cgit print the number of
	modified files for each commit on the repository log page. Default
	value: "0".

enable-log-linecount::
	Flag which, when set to "1", will make cgit print the number of added
	and removed lines for each commit on the repository log page. Default
	value: "0".

enable-remote-branches::
	Flag which, when set to "1", will make cgit display remote branches
	in the summary and refs views. Default value: "0". See also:
	"repo.enable-remote-branches".

enable-subject-links::
	Flag which, when set to "1", will make cgit use the subject of the
	parent commit as link text when generating links to parent commits
	in commit view. Default value: "0". See also:
	"repo.enable-subject-links".

enable-tree-linenumbers::
	Flag which, when set to "1", will make cgit generate linenumber links
	for plaintext blobs printed in the tree view. Default value: "1".

favicon::
	Url used as link to a shortcut icon for cgit. If specified, it is
	suggested to use the value "/favicon.ico" since certain browsers will
	ignore other values. Default value: none.

footer::
	The content of the file specified with this option will be included
	verbatim at the bottom of all pages (i.e. it replaces the standard
	"generated by..." message. Default value: none.

head-include::
	The content of the file specified with this option will be included
	verbatim in the html HEAD section on all pages. Default value: none.

header::
	The content of the file specified with this option will be included
	verbatim at the top of all pages. Default value: none.

include::
	Name of a configfile to include before the rest of the current config-
	file is parsed. Default value: none.

index-header::
	The content of the file specified with this option will be included
	verbatim above the repository index. This setting is deprecated, and
	will not be supported by cgit-1.0 (use root-readme instead). Default
	value: none.

index-info::
	The content of the file specified with this option will be included
	verbatim below the heading on the repository index page. This setting
	is deprecated, and will not be supported by cgit-1.0 (use root-desc
	instead). Default value: none.

local-time::
	Flag which, if set to "1", makes cgit print commit and tag times in the
	servers timezone. Default value: "0".

logo::
	Url which specifies the source of an image which will be used as a logo
	on all cgit pages. Default value: "/cgit.png".

logo-link::
	Url loaded when clicking on the cgit logo image. If unspecified the
	calculated url of the repository index page will be used. Default
	value: none.

max-atom-items::
	Specifies the number of items to display in atom feeds view. Default
	value: "10".

max-commit-count::
	Specifies the number of entries to list per page in "log" view. Default
	value: "50".

max-message-length::
	Specifies the maximum number of commit message characters to display in
	"log" view. Default value: "80".

max-repo-count::
	Specifies the number of entries to list per page on the	repository
	index page. Default value: "50".

max-repodesc-length::
	Specifies the maximum number of repo description characters to display
	on the repository index page. Default value: "80".

max-blob-size::
	Specifies the maximum size of a blob to display HTML for in KBytes.
	Default value: "0" (limit disabled).

max-stats::
	Set the default maximum statistics period. Valid values are "week",
	"month", "quarter" and "year". If unspecified, statistics are
	disabled. Default value: none. See also: "repo.max-stats".

mimetype.<ext>::
	Set the mimetype for the specified filename extension. This is used
	by the `plain` command when returning blob content.

module-link::
	Text which will be used as the formatstring for a hyperlink when a
	submodule is printed in a directory listing. The arguments for the
	formatstring are the path and SHA1 of the submodule commit. Default
	value: "./?repo=%s&page=commit&id=%s"

nocache::
	If set to the value "1" caching will be disabled. This settings is
	deprecated, and will not be honored starting with cgit-1.0. Default
	value: "0".

noplainemail::
	If set to "1" showing full author email adresses will be disabled.
	Default value: "0".

noheader::
	Flag which, when set to "1", will make cgit omit the standard header
	on all pages. Default value: none. See also: "embedded".

project-list::
	A list of subdirectories inside of scan-path, relative to it, that
	should loaded as git repositories. This must be defined prior to
	scan-path. Default value: none. See also: scan-path.

readme::
	Text which will be used as default value for "repo.readme". Default
	value: none.

remove-suffix::
	If set to "1" and scan-path is enabled, if any repositories are found
	with a suffix of ".git", this suffix will be removed for the url and
	name. Default value: "0". See also: scan-path.

renamelimit::
	Maximum number of files to consider when detecting renames. The value
	 "-1" uses the compiletime value in git (for further info, look at
	  `man git-diff`). Default value: "-1".

repo.group::
	Legacy alias for "section". This option is deprecated and will not be
	supported in cgit-1.0.

robots::
	Text used as content for the "robots" meta-tag. Default value:
	"index, nofollow".

root-desc::
	Text printed below the heading on the repository index page. Default
	value: "a fast webinterface for the git dscm".

root-readme::
	The content of the file specified with this option will be included
	verbatim below the "about" link on the repository index page. Default
	value: none.

root-title::
	Text printed as heading on the repository index page. Default value:
	"Git Repository Browser".

scan-hidden-path::
	If set to "1" and scan-path is enabled, scan-path will recurse into
	directories whose name starts with a period ('.'). Otherwise,
	scan-path will stay away from such directories (considered as
	"hidden"). Note that this does not apply to the ".git" directory in
	non-bare repos. This must be defined prior to scan-path.
	Default value: 0. See also: scan-path.

scan-path::
	A path which will be scanned for repositories. If caching is enabled,
	the result will be cached as a cgitrc include-file in the cache
	directory. If project-list has been defined prior to scan-path,
	scan-path loads only the directories listed in the file pointed to by
	project-list. Be advised that only the global settings taken
	before the scan-path directive will be applied to each repository.
	Default value: none. See also: cache-scanrc-ttl, project-list.

section::
	The name of the current repository section - all repositories defined
	after this option will inherit the current section name. Default value:
	none.

section-from-path::
	A number which, if specified before scan-path, specifies how many
	path elements from each repo path to use as a default section name.
	If negative, cgit will discard the specified number of path elements
	above the repo directory. Default value: 0.

side-by-side-diffs::
	If set to "1" shows side-by-side diffs instead of unidiffs per
	default. Default value: "0".

snapshots::
	Text which specifies the default set of snapshot formats generated by
	cgit. The value is a space-separated list of zero or more of the
	values "tar", "tar.gz", "tar.bz2", "tar.xz" and "zip". Default value:
	none.

source-filter::
	Specifies a command which will be invoked to format plaintext blobs
	in the tree view. The command will get the blob content on its STDIN
	and the name of the blob as its only command line argument. The STDOUT
	from the command will be included verbatim as the blob contents, i.e.
	this can be used to implement e.g. syntax highlighting. Default value:
	none.

summary-branches::
	Specifies the number of branches to display in the repository "summary"
	view. Default value: "10".

summary-log::
	Specifies the number of log entries to display in the repository
	"summary" view. Default value: "10".

summary-tags::
	Specifies the number of tags to display in the repository "summary"
	view. Default value: "10".

strict-export::
	Filename which, if specified, needs to be present within the repository
	for cgit to allow access to that repository. This can be used to emulate
	gitweb's EXPORT_OK and STRICT_EXPORT functionality and limit cgit's
	repositories to match those exported by git-daemon. This option MUST come
	before 'scan-path'.

virtual-root::
	Url which, if specified, will be used as root for all cgit links. It
	will also cause cgit to generate 'virtual urls', i.e. urls like
	'/cgit/tree/README' as opposed to '?r=cgit&p=tree&path=README'. Default
	value: none.
	NOTE: cgit has recently learned how to use PATH_INFO to achieve the
	same kind of virtual urls, so this option will probably be deprecated.

REPOSITORY SETTINGS
-------------------
repo.about-filter::
	Override the default about-filter. Default value: none. See also:
	"enable-filter-overrides".

repo.clone-url::
	A list of space-separated urls which can be used to clone this repo.
	Default value: none.

repo.commit-filter::
	Override the default commit-filter. Default value: none. See also:
	"enable-filter-overrides".

repo.defbranch::
	The name of the default branch for this repository. If no such branch
	exists in the repository, the first branch name (when sorted) is used
	as default instead. Default value: "master".

repo.desc::
	The value to show as repository description. Default value: none.

repo.enable-commit-graph::
	A flag which can be used to disable the global setting
	`enable-commit-graph'. Default value: none.

repo.enable-log-filecount::
	A flag which can be used to disable the global setting
	`enable-log-filecount'. Default value: none.

repo.enable-log-linecount::
	A flag which can be used to disable the global setting
	`enable-log-linecount'. Default value: none.

repo.enable-remote-branches::
	Flag which, when set to "1", will make cgit display remote branches
	in the summary and refs views. Default value: <enable-remote-branches>.

repo.enable-subject-links::
	A flag which can be used to override the global setting
	`enable-subject-links'. Default value: none.

repo.logo::
	Url which specifies the source of an image which will be used as a logo
	on this repo's pages. Default value: global logo.

repo.logo-link::
	Url loaded when clicking on the cgit logo image. If unspecified the
	calculated url of the repository index page will be used. Default
	value: global logo-link.

repo.max-stats::
	Override the default maximum statistics period. Valid values are equal
	to the values specified for the global "max-stats" setting. Default
	value: none.

repo.name::
	The value to show as repository name. Default value: <repo.url>.

repo.owner::
	A value used to identify the owner of the repository. Default value:
	none.

repo.path::
	An absolute path to the repository directory. For non-bare repositories
	this is the .git-directory. Default value: none.

repo.readme::
	A path (relative to <repo.path>) which specifies a file to include
	verbatim as the "About" page for this repo. You may also specify a
	git refspec by head or by hash by prepending the refspec followed by
	a colon. For example, "master:docs/readme.mkd" Default value: <readme>.

repo.snapshots::
	A mask of allowed snapshot-formats for this repo, restricted by the
	"snapshots" global setting. Default value: <snapshots>.

repo.section::
	Override the current section name for this repository. Default value:
	none.

repo.source-filter::
	Override the default source-filter. Default value: none. See also:
	"enable-filter-overrides".

repo.url::
	The relative url used to access the repository. This must be the first
	setting specified for each repo. Default value: none.


REPOSITORY-SPECIFIC CGITRC FILE
-------------------------------
When the option "scan-path" is used to auto-discover git repositories, cgit
will try to parse the file "cgitrc" within any found repository. Such a
repo-specific config file may contain any of the repo-specific options
described above, except "repo.url" and "repo.path". Additionally, the "filter"
options are only acknowledged in repo-specific config files when
"enable-filter-overrides" is set to "1".

Note: the "repo." prefix is dropped from the option names in repo-specific
config files, e.g. "repo.desc" becomes "desc".


EXAMPLE CGITRC FILE
-------------------

....
# Enable caching of up to 1000 output entriess
cache-size=1000


# Specify some default clone prefixes
clone-prefix=git://example.com ssh://example.com/pub/git http://example.com/git

# Specify the css url
css=/css/cgit.css


# Show extra links for each repository on the index page
enable-index-links=1


# Enable ASCII art commit history graph on the log pages
enable-commit-graph=1


# Show number of affected files per commit on the log pages
enable-log-filecount=1


# Show number of added/removed lines per commit on the log pages
enable-log-linecount=1


# Add a cgit favicon
favicon=/favicon.ico


# Use a custom logo
logo=/img/mylogo.png


# Enable statistics per week, month and quarter
max-stats=quarter


# Set the title and heading of the repository index page
root-title=example.com git repositories


# Set a subheading for the repository index page
root-desc=tracking the foobar development


# Include some more info about example.com on the index page
root-readme=/var/www/htdocs/about.html


# Allow download of tar.gz, tar.bz2 and zip-files
snapshots=tar.gz tar.bz2 zip


##
## List of common mimetypes
##

mimetype.gif=image/gif
mimetype.html=text/html
mimetype.jpg=image/jpeg
mimetype.jpeg=image/jpeg
mimetype.pdf=application/pdf
mimetype.png=image/png
mimetype.svg=image/svg+xml


##
## List of repositories.
## PS: Any repositories listed when section is unset will not be
##     displayed under a section heading
## PPS: This list could be kept in a different file (e.g. '/etc/cgitrepos')
##      and included like this:
##        include=/etc/cgitrepos
##


repo.url=foo
repo.path=/pub/git/foo.git
repo.desc=the master foo repository
repo.owner=fooman@example.com
repo.readme=info/web/about.html


repo.url=bar
repo.path=/pub/git/bar.git
repo.desc=the bars for your foo
repo.owner=barman@example.com
repo.readme=info/web/about.html


# The next repositories will be displayed under the 'extras' heading
section=extras


repo.url=baz
repo.path=/pub/git/baz.git
repo.desc=a set of extensions for bar users

repo.url=wiz
repo.path=/pub/git/wiz.git
repo.desc=the wizard of foo


# Add some mirrored repositories
section=mirrors


repo.url=git
repo.path=/pub/git/git.git
repo.desc=the dscm


repo.url=linux
repo.path=/pub/git/linux.git
repo.desc=the kernel

# Disable adhoc downloads of this repo
repo.snapshots=0

# Disable line-counts for this repo
repo.enable-log-linecount=0

# Restrict the max statistics period for this repo
repo.max-stats=month
....


BUGS
----
Comments currently cannot appear on the same line as a setting; the comment
will be included as part of the value. E.g. this line:

	robots=index  # allow indexing

will generate the following html element:

	<meta name='robots' content='index  # allow indexing'/>



AUTHOR
------
Lars Hjemli <hjemli@gmail.com>
Jason A. Donenfeld <Jason@zx2c4.com>