# The entry point for building, documenting and installing cgit. The program
# itself is compiled inside the bundled Git tree by source/cgit.mk, which this
# file invokes with the paths and the defaults it needs. Everything that is not
# compilation, that is the manual page, the install and uninstall rules and the
# housekeeping targets, is driven from here.

.DEFAULT_GOAL := all
.SUFFIXES:

# Sources live in source/, web assets in assets/, Lua filters in
# custom/extensions/, the bundled Git tree in vendor/git, and everything
# generated lands in build/. CGIT_ROOT leads from inside the Git tree back to
# the project root, because the cgit build runs with vendor/git as its working
# directory.
SRCDIR   = source
ASSETDIR = assets
EXTDIR   = custom/extensions
GITDIR   = vendor/git
BUILDDIR = build
CGIT_ROOT = ../..

# The Git release that get-git fetches when the submodule is not checked out.
# Keep it in step with the submodule pin in .gitmodules.
GIT_VERSION = 2.55.0
GIT_URL = https://www.kernel.org/pub/software/scm/git/git-$(GIT_VERSION).tar.xz

# Compiled-in cgit defaults, all overridable through cgit.conf. Every one
# carries the CGIT_ prefix except CACHE_ROOT, which is inherited from upstream
# under that name.
CGIT_VERSION = v2.6.1
CGIT_SCRIPT_NAME = cgit.cgi
CGIT_SCRIPT_PATH = /var/www/htdocs/cgit
CGIT_DATA_PATH = $(CGIT_SCRIPT_PATH)
CGIT_CONFIG = /etc/cgitrc
CACHE_ROOT = /var/cache/cgit

# The standard GNU install directories, kept lowercase so that packaging can
# override them. filterdir is the one cgit-specific addition.
prefix = /usr/local
libdir = $(prefix)/lib
filterdir = $(libdir)/cgit/filters
docdir = $(prefix)/share/doc/cgit
htmldir = $(docdir)
mandir = $(prefix)/share/man

# The files that go into the data path and the filter directory. One list each
# drives both install and uninstall, so the two can never drift apart.
ASSETS       = cgit.css cgit.js cgit.png favicon.ico robots.txt
FILTER_FILES = $(notdir $(wildcard $(EXTDIR)/*.lua))

# The manual page source, *.5.txt, sits at the project root and is rendered
# into build/. Only one man section exists, so both document lists derive
# straight from MAN5_TXT.
MAN5_TXT = $(wildcard *.5.txt)
DOC_MAN5 = $(patsubst %.txt,$(BUILDDIR)/%,$(MAN5_TXT))
DOC_HTML = $(patsubst %.txt,$(BUILDDIR)/%.html,$(MAN5_TXT))

INSTALL = install
ASCIIDOC = asciidoc
ASCIIDOC_EXTRA =
ASCIIDOC_HTML = xhtml11
ASCIIDOC_COMMON = $(ASCIIDOC) $(ASCIIDOC_EXTRA)
TXT_TO_HTML = $(ASCIIDOC_COMMON) -b $(ASCIIDOC_HTML)

# Reuse Git's platform detection, then let the user override any of the
# settings above through cgit.conf. Both includes must stay after the defaults.
-include $(GITDIR)/config.mak.uname
-include cgit.conf

export CGIT_VERSION CGIT_SCRIPT_NAME CGIT_SCRIPT_PATH CGIT_DATA_PATH CGIT_CONFIG CACHE_ROOT

all: cgit

# NO_RUST keeps Cargo out of the build. Git 2.55 inverted the flag that used to
# be WITH_RUST, so Rust is now compiled in unless it is turned off, and leaving
# this out would quietly make Cargo a build requirement. Git 3.0 drops the
# choice entirely, at which point this stops working and Rust becomes
# mandatory.
GIT_BUILD_FLAGS = NO_CURL=1 NO_OPENSSL=1 NO_RUST=1

cgit:
	+@$(MAKE) -C $(GITDIR) -f $(CGIT_ROOT)/$(SRCDIR)/cgit.mk \
		$(CGIT_ROOT)/$(BUILDDIR)/cgit $(EXTRA_GIT_TARGETS) $(GIT_BUILD_FLAGS)

sparse:
	+@$(MAKE) -C $(GITDIR) -f $(CGIT_ROOT)/$(SRCDIR)/cgit.mk \
		$(GIT_BUILD_FLAGS) cgit-sparse

test: cgit-with-git
	+@$(MAKE) -C tests all

# The test helpers link against a fully built Git tree, so this asks the sub
# make for Git's own all target alongside cgit.
cgit-with-git:
	+@$(MAKE) cgit EXTRA_GIT_TARGETS=all

doc: doc-man doc-html
doc-man: $(DOC_MAN5)
doc-html: $(DOC_HTML)

$(DOC_MAN5): $(BUILDDIR)/%.5 : %.5.txt
	@mkdir -p $(BUILDDIR)
	a2x -f manpage -D $(BUILDDIR) $<

$(DOC_HTML): $(BUILDDIR)/%.html : %.txt
	@mkdir -p $(BUILDDIR)
	$(TXT_TO_HTML) -o $@ $<

install: all
	$(INSTALL) -m 0755 -d $(DESTDIR)$(CGIT_SCRIPT_PATH)
	$(INSTALL) -m 0755 $(BUILDDIR)/cgit $(DESTDIR)$(CGIT_SCRIPT_PATH)/$(CGIT_SCRIPT_NAME)
	$(INSTALL) -m 0755 -d $(DESTDIR)$(CGIT_DATA_PATH)
	$(INSTALL) -m 0644 $(addprefix $(ASSETDIR)/,$(ASSETS)) $(DESTDIR)$(CGIT_DATA_PATH)
	$(INSTALL) -m 0755 -d $(DESTDIR)$(filterdir)
	$(INSTALL) -m 0644 $(EXTDIR)/*.lua $(DESTDIR)$(filterdir)

install-doc: install-man install-html

install-man: doc-man
	$(INSTALL) -m 0755 -d $(DESTDIR)$(mandir)/man5
	$(INSTALL) -m 0644 $(DOC_MAN5) $(DESTDIR)$(mandir)/man5

install-html: doc-html
	$(INSTALL) -m 0755 -d $(DESTDIR)$(htmldir)
	$(INSTALL) -m 0644 $(DOC_HTML) $(DESTDIR)$(htmldir)

uninstall:
	$(RM) $(DESTDIR)$(CGIT_SCRIPT_PATH)/$(CGIT_SCRIPT_NAME)
	$(RM) $(addprefix $(DESTDIR)$(CGIT_DATA_PATH)/,$(ASSETS))
	$(RM) $(addprefix $(DESTDIR)$(filterdir)/,$(FILTER_FILES))

uninstall-doc: uninstall-man uninstall-html

uninstall-man:
	@for i in $(notdir $(DOC_MAN5)); do \
	    rm -fv $(DESTDIR)$(mandir)/man5/$$i; \
	done

uninstall-html:
	@for i in $(notdir $(DOC_HTML)); do \
	    rm -fv $(DESTDIR)$(htmldir)/$$i; \
	done

# Compiled output lives under build/ and the test suite writes into tests/, so
# cleaning removes both. The descent into tests is guarded because
# tests/Makefile includes git's config.mak.uname, which needs the submodule
# present.
clean:
	$(RM) -r $(BUILDDIR)
	@if test -e $(GITDIR)/config.mak.uname; then $(MAKE) -C tests clean; fi

cleanall: clean
	@if test -e $(GITDIR)/Makefile; then $(MAKE) -C $(GITDIR) clean; fi

get-git:
	mkdir -p $(dir $(GITDIR))
	curl -L $(GIT_URL) | tar -xJf - && rm -rf $(GITDIR) && mv git-$(GIT_VERSION) $(GITDIR)

tags:
	@mkdir -p $(BUILDDIR)
	find $(SRCDIR) -name '*.[ch]' | xargs ctags -f $(BUILDDIR)/tags

# Grouped to mirror the order of the targets above.
.PHONY: all cgit cgit-with-git sparse test
.PHONY: doc doc-man doc-html
.PHONY: install install-doc install-man install-html
.PHONY: uninstall uninstall-doc uninstall-man uninstall-html
.PHONY: clean cleanall get-git tags